บทความวิจัยพ.ศ. 2556Effect of cutting tool geometry on tool wear and tool temperature during ti-6al-4v machining พ.ศ. 2556 ติดต่อนักวิจัย แชร์ บันทึกคำสำคัญTemperatureFEMFlank wearTi-6Al-4V alloyInsert geometryงานวิจัยในหัวข้อใกล้เคียงEffect of cutting parameters on tool wear when trochoidal pocket milling Ti6Al4V Universiti Teknologi Malaysia พ.ศ. 2562Experimental and 3D-ANN based analysis and prediction of cutting forces, tool vibration and tool wear in boring of Ti-6Al-4V alloy พ.ศ. 2562Optimum performance of green machining on thin walled ti6al4v using rsm and ann in terms of cutting force and surface roughness พ.ศ. 2562Content comparative investigation on tool wear during end milling of AISI H13 steel with different tool path strategies Universiti Islam Antarabangsa Malaysia พ.ศ. 2560Experimental investigation of minimum quantity lubrication on tool wear in aluminum alloy 6061-T6 using different cutting tools พ.ศ. 2557The influence of cutting fluid conditions and machining parameters on cutting performance and wear mechanism of coated carbide tools พ.ศ. 2561The Effect of Drill Reamer Tool on Cutting Force and Temperature when Machining with Different Parameters and Cutting Condition พ.ศ. 2563Performance of CVD coated carbide tool by optimizing machining parameters during turning titanium alloy Ti-6AL-4V eli in flooded condition พ.ศ. 2561Effect of sintering temperature on density, hardness and tool wear for alumina-zirconia cutting tool พ.ศ. 2562Tool wear model and wear mechanisms when machining TiAlN ball end mill with high thermal conductivity steel (HTCS 150) พ.ศ. 2563